Leave Your Message
Anhydrous Copper Sulfate (CuSO4) CAS 7758-98-7 Expands Supply for Agriculture, Electroplating and Mining Markets
News

Anhydrous Copper Sulfate (CuSO4) CAS 7758-98-7 Expands Supply for Agriculture, Electroplating and Mining Markets

2026-10-30

Industry News — Anhydrous copper sulfate (CuSO4), CAS 7758-98-7, is now available in industrial and agricultural grades for fungicide and algaecide formulations, copper electroplating, mineral flotation and animal feed supplementation. This product news outlines the properties, applications and selection guidance for buyers evaluating anhydrous copper sulfate.

Anhydrous copper sulfate is the low-moisture form of copper sulfate, typically supplied as an off-white to grayish powder. Unlike the familiar blue pentaHydrate crystal, the anhydrous form absorbs water readily and is used where tight moisture control, fast dissolution or downstream processing requires a dry powder.

1. What Is Anhydrous Copper Sulfate?

Anhydrous copper sulfate is the inorganic copper salt with the formula CuSO4 and CAS number 7758-98-7. It is produced by drying or calcining copper sulfate pentahydrate, removing the water of crystallization. It appears as an off-white to grayish powder and turns blue when exposed to moisture.

Two common commercial forms are available:

  1. Anhydrous copper sulfate (CuSO4) — dry powder, low moisture, suited to formulations and processes that must avoid excess water.
  2. Copper sulfate pentahydrate (CuSO4·5H2O) — the familiar blue crystal, CAS 7758-99-8, used where cost and handling favor the crystalline grade.

Both forms dissolve in water to give the same blue copper solution, but the anhydrous grade is preferred for drier processes.

2. Key Properties

The following properties make anhydrous copper sulfate suitable for high-performance applications:

  1. Copper source — provides soluble copper for agricultural, plating and industrial use.
  2. Water solubility — dissolves readily to form a blue aqueous solution.
  3. Low moisture — suitable for dry blending and controlled-process applications.
  4. Hygroscopic nature — absorbs moisture, so sealed storage is required.
  5. Acidic solution — aqueous solution is mildly acidic, about pH 3.5–4.5.
  6. Purity control — consistent copper content and low insoluble matter.

3. Agricultural and Aquaculture Applications

Agriculture and aquaculture remain the largest markets for copper sulfate. The anhydrous grade is used where a dry, free-flowing powder is preferred for formulation:

  1. Fungicide — control of fungal diseases in orchards, vineyards and field crops.
  2. Algaecide — algae control in ponds, reservoirs and irrigation systems.
  3. Snail control — molluscicide programs in aquaculture and waterways.
  4. Soil treatment — correction of copper-deficient soils and as a trace element source.

In aquaculture, copper sulfate is dosed carefully to control algae and parasites, with dosing adjusted to water temperature, alkalinity and species present.

4. Electroplating and Surface Treatment

Steady industrial demand comes from electroplating and surface treatment:

  1. Copper plating baths — anhydrous copper sulfate supplies the copper ion in acid copper plating solutions.
  2. Anodizing and conversion coatings — used in certain surface treatment formulations.
  3. Pretreatment — as an etchant and activator in metal preparation.
  4. PCB manufacturing — copper deposition in printed circuit board production.

The low-moisture, high-purity grade helps plating baths maintain consistent copper concentration.

5. Mining, Feed and Industrial Uses

Beyond agriculture and plating, anhydrous copper sulfate supports a broad range of industrial processes:

  1. Mineral flotation — a flotation reagent in copper and other ore processing.
  2. Animal feed — trace copper supplementation for livestock and poultry.
  3. Pigments and mordants — pigments, textile dyeing and printing.
  4. Wood preservation — component in wood preservative formulations.
  5. Catalysts — reagent in chemical synthesis and catalyst preparation.

6. Selection Guidance

Buyers should consider the following when selecting anhydrous copper sulfate:

  1. Form — anhydrous powder for low-moisture processes; pentahydrate crystal for general use.
  2. Purity — higher purity for electroplating and feed; industrial grade for general use.
  3. Copper content — match the guaranteed Cu assay to the formulation.
  4. Moisture control — sealed packaging and dry storage, given hygroscopic behavior.
  5. Regulatory grade — confirm whether the intended use requires an agricultural, feed or plating grade.

7. Supply and Customization

Anhydrous copper sulfate (CuSO4), CAS 7758-98-7, is offered in industrial and agricultural grades, with purity, particle size and packaging tailored to customer requirements. Each order is supplied with documentation to support material traceability and quality control.

Copper Sulfate (CuSO4).jpg